Pathology Scanner SG300
Fully automated pathology scanner*
Pathology Scanner SG300
Fully automated pathology scanner*
SG300 is designed to accommodate laboratories for high volume labs that want to maximize scanner utilization and further reduce the total cost of ownership per slide by means of overnight scanning. With a high throughput, high first time right rate and load and walk away scanning, the SG300 enables you to digitize your histology samples and obtain high quality clinical diagnostic images for routine use and integrated pathology networks.
Premium scanner that delivers best in class digitization for large labs.
Image gallery
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
- Clinical image digital pathology
Features
High throughput
One scanner can scan up to 60 slides per hour for a slide with 15x15mm tissue size. Each scanner has a slide capacity of 300 slides that can be continuously loaded, truly enabling fully automated nonstop scanning. Even if an error is detected it will indicate this to the user but continue scanning the next available slide, enabling high throughput digitization.
High quality images
Our clinically validated scanner delivers high quality images by using a standardized and fully automated scanning process. Each slide is scanned at the equivalence of 40 times magnification (0.25 um/pixel). This results in sharp high resolution images which are vital for digitizing the primary diagnostic workflow and a key enabler for the use of image analysis algorithms.
Automated operation
All Philips scanners are designed for ‘load and walk away’ operation. Anyone in the lab can load slides into the scanner and then the digitization process will proceed automatically. This automated processing is supported by numerous algorithms for detection of tissue, barcode, and coverslip, as well as continuous auto-focusing algorithms used during scanning.
Specifications
- Pathology Scanner Second Generation
- Slide Capacity
- 300
- Scanning method
- TDI line scanning
- Focus method
- Autofocus
- Output format
- iSyntax Philips proprietary file format with either RAW or iSyntax compression
- Slide rack
- Winlab LS-20/ Winlab LSM-20, Sakura 4768 20-slide basket (max. number of slides 20)
- Operating temperature
- 10 to 35°C
- Dimensions (LxWxH in mm) doors closed
- 680x950x675
- Scan time (excluding handling and pre-scan per slide)
- SG300 ≤ 43 seconds at 40x equivalent (15x15mm scan area)
- Total scan time (including handling and pre-scan) per slide
- SG300 ≤ 62 seconds at 40x equivalent (15x15mm scan area)
- Average percentage of tissue detected and scanned
- ≥ 99.5%
- Power supply
- 100-240 V AC, 50/60 Hz, 700 Watt
- Magnification objective
- NA of 0.75 plan Apo
- Pixel size/ resolution
- 0.25 μm/ pixel
- Compliance to standards
- EN IEC 61010-1:2010 /A1:2016, EN IEC 61010-2-101:2018, EN IEC 61326-1:2013 FCC Part 15, The IEC 6132
- The IEC 61326-2-6 (IVD), IEC 61326-1:2012 IEC 61326-2-6:2012
- Barcode support
- 1D code type: Code 39 with mod 43 checksum (ISO/IEC 16388:2007)
- Code 128 (ISO/IEC 15417:2007)
- 2D code type: Data Matrix ECC 200 - Code 39,
- Code 128 (ISO/IEC16022:2006) Recommended barcode type for all glass slides.
- Relative humidity (no condensation)
- Between 50% at 40 °C and 80% at 31 °C
- Weight (kg)
- 153
- SG connectivity ports
- Ethernet cable for 10GB (required CAT 6 Cable) / and 1GB/s network cable with RJ45
- connector (preferable CAT 6)
- Image Management System Review Application
- Minimal requirements of client computer to run the IMS viewer software
- .
- CPU
- Intel Xeon E5-1620 v3 @ GHz or similar
- RAM
- 8 GB physical memory
- Connectivity
- 100 Mbit/s Ethernet
- Video card
- GPU Memory: 4GB GeForce GTX 1050 Ti or similar
- *Updating the graphics card driver on the client computer to the latest version is recommended.
- Software requirements on client computer
- Operating system
- Microsoft Windows 8, 8.1 or 10-64 bit
- Browser software supporting HTML 5 standard
- 100 Mbit/s Ethernet
- Connectivity
- Chrome (recommended), Internet Explorer***
- *** Chrome is required for the feature Use my computer for image processing.
- Video card
- GPU Memory: 4GB
- GeForce GTX 1050 Ti or similar*
- *Updating the graphics card driver on the client computer to the latest version is recommended.
- Other software
- PDF viewer
- E-mail client
- Image Management System Application Server and Storage Software
- CPU
- Dual socket Intel 6-core @ 2.3GHz
- RAM
- 32GB
- Storage
- Protection against a single disk failure, e.g. RAID configuration or data replication.
- For usage with 5 scanners or more: Flash Disks
Disclaimer
*It has market clearance in EEA (European Economic Area), United Kingdom, Ireland and Singapore. Specific conditions apply to the USA market.
Philips IntelliSite Pathology Solution (PIPS) is in conformance with Regulation (EU) 201 7/746 of the European Parliament and of the Council of 5 April 2017 on In Vitro Diagnostics (IVDR).